Everyone involved in the life of a fire door, from its specification to maintaining it in use, is responsible for protecting property and saving lives. But all too often we rely on the next person to do his job and get it right.
Our 'Circle of Responsibility' ensures that everyone recognises what their role is. If you are in the circle - you have responsibilities for fire doors.
Or view the video "Fire Safety - It's YOUR Responsibility! " on this page to see what you need to know.
If you'd like to know more about fire door safety and YOUR responsibilities, then visit the BWF Knowledge Centre on this website.
To understand more about Fire Door Inspections or to gain a Diploma Qualification in Fire Doors visit www.fdis.co.uk
The Architect or Specifier
You have the power to prevent decisions which might be based on cost, rather than safety, being taken further down the line.
- Insist on third party accredited fire doors
- Consider specifying doorsets
- Insist on 3rd party certificated doors and compatible components.
You often have the choice either to use the cheapest option available, or take the responsibility for ensuring the safety of the occupants and insist on certification by using third party accredited products.
Building contractors always feel the pressure to bring a job in, on, or under, budget. Choosing cheaper untested products may save your customer money, but if a fire breaks out it will cost far more in lives and property.
- Only use third party accredited products.
- Consider using doorsets
- Never cut apertures on site
- Only stock and sell 3rd party accredited and certified doors, frames and other components
- Ensure your staff are aware of their responsibilities when advising customers
Consider becoming a BWF Approved Fire Door Centre.
There are over 100 Approved Fire Door Centres whose staff are trained to understand fire doors, their components and the relevant building regulations. Every BWF Approved Fire Door Centre commits to stocking the correct ranges of components to suit the doors they supply. - contact us for details.
The Door Installer or Fitter
- Make sure you buy the correct compatible components recommended by the door supplier
- Check the label and fitting instructions that came with the door
- If in doubt ask
- Pick up the 'Builder's Guide' from your local BWF Approved Fire Door Centre.
Building Control / Approved Inspectors / Fire departments
You bear the final responsibility for checking and assessing fire doors as part of the signing-off procedure for the building. The only way the fire door will work correctly and comply with its certificate is if it replicates the original test.
- Check the frame is the right one for the door
- Check the door closer is compatible with the door and closes on the latch in a controlled way
- Check the fire door label on the door or doorset
- Use the BWF Gap Tester to ensure the door has 3mm gaps all around the door
Owners / Facilities Managers /Other 'responsible persons'
In line with the Regulatory Reform (Fire Safety) Order you must ensure fire doors work correctly and are properly maintained.
- Make sure you check fire doors regularly
- Check hinges, closers, lock and latches etc.
- Use the BWF Maintenance Checklist - click here to download
- Make sure staff are aware of the dangers of abusing fire doors. Never leave them propped open